• EN54-7:2000 +A1:2002 +A2:2006 Compliance
• LPCB Approved
• Using microprocessor technology with
memory capacity up to 10 events
• Analogue sending and digital addressing
• Provide real time algorithm to the control
panel
• Smart linear drift compensation
• Onsite adjustable parameter
• 360-degree visual indicator
• Removable chamber against dust and
small insect
• Ancillary remote indicator output
Aesthetically pleasing design
• EN 54-5:2000 + A1:2002 Compliance
• LPCB Approved
• Using microprocessor technology with
memory capacity up to 10 events
• Analogue sensor and digital addressing
• Provide real time algorithm to the control
panel
• 360-degree visual indicator
• Onsite Adjustable Parameter
• Ancillary remote indicator output
• Aesthetically pleasing design
EN54-29 Compliance
LPCB Pending
Smoke and Heat Sensor
Using microprocessor technology with memory capacity
up to 10 events
Analogue sending and digital addressing
Provide real time algorithm to the control panel
Smart linear drift compensation
360-degree visual indicator
Onsite Adjustable Parameter
Removable chamber against dust and small insect
Ancillary remote indicator output
Aesthetically pleasing design
• EN 54-11:2001 + A1:2005
• LPCB Approved
• Using microprocessor technology
• Digital addressing
• Non-breakable glass and hammerless
• Safe to operate and easy to reset
•Semi-flash Mountea, indoor application
•Optional Backbox for Surfaace mount
(TX7004-MB)
• EN54-18 Compliance
• LPCB Pending
• Built-in MCU processor and digital
addressing
Fire or Supervisory signal configuration
• Input cable monitored
Normally open configuration
• LED status indicator
• Loop powered device
• Aesthetically pleasing design
Surface mounting with fix base for simple installation
simple installation
• Built-in MCU processor and digital
addressing
• Intelligent self-diagnosis of open circuit
• Enhanced capacity of interference
recictence by using multi evel wave filtering
process
• LED status indicator
• Onsite Adjustable Parameter
• Loop and external power input
• Aesthetically pleasing design
• EN54-18:2005 Compliance
• LPCB Approved
• Built-in MCU processor and digital
addressing
• 24Vdc/3A Output relay contact and
Control module
• Input Fire or Supervisory signal
configuration
• LED status indicator
• Onsite Adjustable Parameter
• Loop or external power input
• Aesthetically pleasing design
Surface mounting with fix base for
simple installation
• EN54-18 Compliance
• Built-in MCU processor and digital
addressing
• Intelligent self-diagnosis of open circuit
• Enhanced capacity of interference resistance
by using multilevel wave filtering
process
• LED status indicator
• Onsite Adjustable Parameter
• Loop and external power input
• Aesthetically pleasing design
• Parallel connecting up to 16 conventional
detector
Unic mounting with fix base for
simple installation
• EN54-17:2005 Compliance
• LPCB Approved
• In the event of a short circuit isolates
faulty parts of the loop.
• Automatically resetting once the fault has
been cleared
• Can monitor up to 70 devices
• LED status indicator
• Loop powered device
• Aesthetically pleasing design
Surface mounting installation
• EN54-17:2005 Compliance
• LPCB Approved
• In the event of a short circuit isolates
faulty parts of the loop.
• Automatically resetting once the fault has
been cleared
• Can monitor up to 70 devices
• LED status indicator
• Loop powered device
• Aesthetically pleasing design
Surface mounting with fix base for simple
installation
• EN54-18 Compliance
• Built-in MCU processor and digital
addressing
• Two circuits 24Vdc/3A Output relay
contact and Control module
• Two circuits Input Fire or Supervisory
signal configuration
• Dis/Enable Input and output cable monitored
• LED status indicator
• Onsite Adjustable Parameter
• Loop or external power input
• Aesthetically pleasing design
Surface mounting with fix base for simple
installation
• EN54-17:2005 Compliance
• LPCB Approved
• In the event of a short circuit isolates
faulty parts of the loop.
• Automatically resetting once the fault has
been cleared
• Can monitor up to 70 devices
• LED status indicator
• Loop powered device
• Aesthetically pleasing design
Surface mounting installation
• EN54-3 compliance
• Built-in MCU processor and digital
addressing
• 17 tones Programmable sound output
• Encoding modes such as Single-encoding
Mode, Dual-encoding Mode 1 and Dual-encoding Mode 2
• Programmable Evacuate or
Pre-alarm/Evacuate signal
• 8 highlights LED status cluster wi
• Be started directly by a detector
• Onsite adjustable parameters
• Loop power input
• Aesthetically pleasing design
• Mounting base using TX7980 (Excluded)
• Simple & Compact Design
• Anti-Corrosion duct detector housing
• Transparent Lid for easy observation
• Excluding Optical Detector TX7100
• Adjustable Sampling tubes on site.
• Customize sample tube is available upon
request
• EN54-3 Compliance
• Built-in MCU processor and digital
addressing
• 17 tones Programmable sound output
• Programmable Evacuate or
Pre-alarm/Evacuate signal
• Low and normal consumption mode
• One or Two addresses mode
• Onsite Adjustable Parameters
• Loop or external power input
• Aesthetically pleasing design
• Universal mounting with fix base for
simple installation
• EN54-3:2001+A1:2002 + A2:2006 Compliance
• Built-in MCU processor and digital
addressing
• 17 tones Programmable sound output
• Programmable types such as Sounder-Strobe, Sounder or Strobe alone
• Programmable Evacuate or
Pre-alarm/Evacuate signal
• Low and normal consumption mode
• One or Two addresses mode
• 10 Highlights LED status cluster
• Onsite Adjustable Parameters
• Loop or external power input
• Aesthetically pleasing design
Universal mounting with fix base for simple
installation
• EN54-3 Compliance
• Built-in MCU processor and digital
addressing
• 17 tones Programmable sound output
• Programmable types such as Sounder-Strobe, Sounder or Strobe alone
• Programmable Evacuate or
Pre-alarm/Evacuate signal
• Low and normal consumption mode
• One or Two addresses mode
• 10 Highlights LED status cluster
• Onsite Adjustable Parameters
• Loop or external power input
• Aesthetically pleasing design
• Universal mounting with fix base for
simple installation
• Backbox compatible for TX7140.
• Constructed using high quality plastic.
• No electrical circuit.
• Fit on one gang backbox.
• Easy to install.
• Backbox compatible for TX72 Module Series
• Constructed using high quality plastic.
• No electrical circuit.
• Fit on one gang backbox.
• Easy to install.
• EN54-18 Compliance
• Built-in MCU processor and digital
addressing
• Enhanced capacity of interference resistance by using multilevel wave filtering
process
• Four circuits 24Vdc/3A Output relay
contact
• One sounder circuit output.
• Four circuits Input Fire or Supervisory
signal configuration
• Parallel connecting to 16 conventional
detectors
• Input Cable monitored
• LED status indicator